Ok, then my next line of reasoning would be two-fold: 1. an extremely worn key-end felt. On a soft blow the underlever is implanted deep in the worn key-end felt making is difficult to get the key in motion. But after accelation, or a heavy blow, the underlever has past the worn surface and the key is free to move. 2. could be that in addition to this problem the damper underlevers have been regulated way to low, compounding the problem. Tom Servinsky --- On Sat, 7/16/11, tnrwim at aol.com <tnrwim at aol.com> wrote: From: tnrwim at aol.com <tnrwim at aol.com> Subject: Re: [pianotech] Weekend puzzler To: pianotech at ptg.org Date: Saturday, July 16, 2011, 11:13 AM Flat knuckle Center pin coming out of jack, rubbing against neighbor jack flange Burr on top of front rail pin. Wim -----Original Message----- From: Delwin D Fandrich <del at fandrichpiano.com> To: pianotech <pianotech at ptg.org> Sent: Fri, Jul 15, 2011 8:09 pm Subject: [pianotech] Weekend puzzler #yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac td{color:black;} _filtered #yiv35256685 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv35256685 {font-family:"Comic Sans MS";panose-1:3 15 7 2 3 3 2 2 2 4;}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac p.yiv35256685MsoNormal, #yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac li.yiv35256685MsoNormal, #yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac div.yiv35256685MsoNormal {margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:"sans-serif";}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac a:link, #yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac span.yiv35256685MsoHyperlink {color:blue;text-decoration:underline;}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac a:visited, #yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac span.yiv35256685MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac span.yiv35256685EmailStyle17 {font-family:"Comic Sans MS";color:windowtext;font-weight:normal;font-style:normal;text-decoration:none none;}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac .yiv35256685MsoChpDefault {font-family:"sans-serif";} _filtered #yiv35256685 {margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv35256685 #yiv35256685AOLMsgPart_1_b6d44cdf-a122-4906-9946-5f92e9b936ac div.yiv35256685WordSection1 {} The piano is a 1928 Chickering Model M, Scale 141 (small concert size). The problem is this: As the key is depressed slowly—pianissimo—for the first millimeter or so the key and hammer move smoothly. Then something starts binding, it feels like something in the action is dragging, holding the key and action back. After forcing the key down another three or four millimeters action becomes free and everything operates normally. On a medium to hard blow there is good power and the problem is hardly noticeable but at pianissimo the action will hardly play. What is the problem and what caused it? ddf Delwin D Fandrich Piano Design & Fabrication 6939 Foothill Court SW, Olympia, Washington 98512 USA Phone 360.515.0119 — Cell 360.388.6525 del at fandrichpiano.com — ddfandrich at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110716/7d89dbe9/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC