[pianotech] Weekend puzzler

Ed Foote a440a at aol.com
Sat Jul 16 11:18:35 MDT 2011


I have had hanging key leads cause this sort of thing, corroding and swelling, they would rub for a little on the way down. 
Otherwise, I would suspect something grabbing the top of the drop leather, or there was a burr or something digging in on the sides of the mortise. 


Ed Foote RPT
http://www.piano-tuners.org/edfoote/index.html




 

As the key is depressed slowly—pianissimo—for the first millimeter or so the key and hammer move smoothly. Then something starts binding, it feels like something in the action is dragging, holding the key and action back. After forcing the key down another three or four millimeters action becomes free and everything operates normally. On a medium to hard blow there is good power and the problem is hardly noticeable but at pianissimo the action will hardly play.
 
What is the problem and what caused it? 





 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110716/7aeaaaa6/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC