Good guess but the hammershank rebound rail was just sitting loose. Someone had not bothered to fasten it down. There was plenty of room between the wippen flanges and the rail. ddf Delwin D Fandrich Piano Design & Fabrication 6939 Foothill Court SW, Olympia, Washington 98512 USA Phone 360.515.0119 - Cell 360.388.6525 del at fandrichpiano.com <mailto:del at fandrichpiano.com> - ddfandrich at gmail.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of PIANO2NR at aol.com Sent: Saturday, July 16, 2011 3:15 PM To: pianotech at ptg.org Subject: Re: [pianotech] Weekend puzzler Hammer rest rail too low and rubbing on whippen above whippen flange? -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110716/cfd8d198/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC