You can get one at most hardware stores. It's helped me a few times…well worth it…not too expensive either! Are you sure there is no rusted up stuffs that have seized up the screw? Good luck. From: Marshall Gisondi <pianotune05 at hotmail.com<mailto:pianotune05 at hotmail.com>> Reply-To: "pianotech at ptg.org<mailto:pianotech at ptg.org>" <pianotech at ptg.org<mailto:pianotech at ptg.org>> Date: Thursday, August 30, 2012 2:24 PM To: "pianotech at ptg.org<mailto:pianotech at ptg.org>" <pianotech at ptg.org<mailto:pianotech at ptg.org>> Subject: [pianotech] screws too tight Hi John and I think actually two guys named Joh responed. Thanks for the ideas. Impact screwdriver? This might sound odd, but what does this look like or fee like since I use both sight and feel. :-) I'm blessed to be legally blind in that I can see enough but yet have those feeling skills. Thanks again Marshall 215-510-9400 http://www.phillytuner.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120830/032cbe4f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC