[pianotech] Plastic Damper flanges

Rob McCall rob at mccallpiano.com
Mon Jan 2 11:17:03 MST 2012


It's just the flash.  I checked all the hammer flanges and wippen flanges and they're all wood.

Regards,

Rob McCall

McCall Piano Service, LLC
www.mccallpiano.com
Murrieta, CA
951-698-1875

On Jan 02, 2012, at 07:03 , Gerald Groot wrote:

> I don’t have specs for it but, I have done a few of these.  It is a PITA.  I did as Wim suggested, starting from scratch.  Finding the right sized dampers first, then, bending and all that fun stuff that goes along with it. 
>  
> It looks like maybe hammer flanges might be plastic too?  Maybe it’s the flash from the camera…  You’re probably already planning on this but if not, I’d replace whatever else is plastic while you’re at it.  Save time and money later.
>  
> Jer Groot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120102/16f701d5/attachment-0001.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC