Hey! How about starting with pictures of the tilter? Thanks! David Stocker, RPT Tumwater, WA -----Original Message----- From: Douglas Gregg Sent: Monday, January 16, 2012 13:47 To: pianotech at ptg.org Subject: [pianotech] Round bottom Steinways and other Thanks everyone who put in their advice, sympathy, and commiseration FWIW, I also made a grand tipper similar to the "horse" but I consider an improved model I made with plywood sides and 2x6 width. It is lighter, less likely to scratch, easier to position and has no long adjusting screw. Also it does not screw into the keybed like the new one advertised. Best of all it cost about $20 to build if you don't find the materialsfor free. I was considering doing an article for the PTGJ on "solo moving without sweat" if there is an interest. Let me know. Doug Gregg Classic Piano Doc
This PTG archive page provided courtesy of Moy Piano Service, LLC