Hi Joe, The butt springs were bent to prevent them from hitting or getting caught by the damper rail.B- Lim On Jun 9, 2012 12:25 PM, "Joseph Garrett" <joegarrett at earthlink.net> wrote: > Isaac, > You are partially right. AND, your writing skills are just fine, my friend! > It did have, somewhat, to do with the bridle straps, but that's only part > of the picture.<G> > Best Regards, > Joe > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > > > > [Original Message] > > From: Isaac Sadigursky <irs.pianos at earthlink.net> > > To: <joegarrett at earthlink.net> > > Date: 6/8/2012 7:21:19 PM > > Subject: puzzler > > > > Hi, Joe! > > Hope you are doing well!! > > Thanx for all your wonderful posts on the List,I'm learning a lot!! > > puzzler solver: > > Because Hammer Flange Cords had desintegrated,some inexperienced tech > > made Bridle straps Wire too tiight > > when Soft-Left Pedal was depressed-it pulled whippens > > forward,activating Dampers... > > Now you have ringing..'I'm I almost correct on this one?? > > Sorry,I don't wanna put it on the list: My writing skills suck! > > Best wishes.. > > isaac > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120609/f3366435/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC