[pianotech] Nuckljac -- anyone use this to set jacks to knuckles?

erwinspiano erwinspiano at aol.com
Wed Jun 27 17:39:14 MDT 2012


Yeah as per Little Red School house instructions.
Graduate 1976.
Dale



Sent from my Samsung Galaxy Tab 10.1Ed Foote <a440a at aol.com> wrote:Wim says,
I've found that the easiest way to line up the knuckle is to do it from the back of the action. Turn the action around so that you are standing in front of the hammers. Raise a couple of hammers to the right of the jack you want to adjust.  Lower the balancier of the wippen under the knuckle, so you can see the knuckle core and jack alignment. Reach around the front of the action to put the tool on the regulating button, and adjust the jack until it lines up with the knuckle.
Yeah,  what he says!

Ed Foote RPT
http://www.piano-tuners.org/edfoote/index.html

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120627/caec413a/attachment-0001.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC