[pianotech] Archives???!!!

[Joe Goss]

You are correct two Jigs
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Dale Erwin 
  To: joegarrett at earthlink.net ; pianotech at ptg.org 
  Sent: Wednesday, March 28, 2012 6:28 PM
  Subject: Re: [pianotech] Archives???!!!


     Joe
    What jig specifically? Spurlock or other. R. Jolly sent me plans for one that allows hammer to be tapered even if they are on the shanks.  I never made them. It require to jigs one for each side.


  Dale Erwin RPT-
  Mason & Hamlin/Steinway/U.S pianos
  Pre-hung Ronsen hammer sets/Abel parts
  Sitka Soundboards & Supplies
  WWW.Erwinspiano.com
  209-577-8397

   
    





  -----Original Message-----
  From: Joseph Garrett <joegarrett at earthlink.net>
  To: pianotech <pianotech at ptg.org>
  Sent: Wed, Mar 28, 2012 2:56 pm
  Subject: [pianotech] Archives???!!!


Help! I'm trying to access the Archives, in hopes of finding some pictures
of Hammer Tapering Jigs or Hammer Thinning Jigs!! Darned thing is not
cooperating! Any help will be greatly appreciated.
Much Thanks in Advance.
Joe


Joe Garrett, R.P.T.
Captain of the Tool Police
Squares R I

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120328/29c06c08/attachment.htm>