[pianotech] Pressure Bar

[Noah Frere]

Can i just. like, paint lacquer on there though? I already have that...i
don't see as to why i would really need Rustoleum specifically.


On Wed, Nov 14, 2012 at 3:51 PM, Noah Frere <noahfrere at gmail.com> wrote:

> Thanks for the speedy reply. Yeah it is off the piano. I've never plated
> anything before. I'll do as you suggest.
>
>
>
> On Wed, Nov 14, 2012 at 3:37 PM, Paul McCloud <pmc033 at earthlink.net>wrote:
>
>> If it's steel, it will eventually rust to some extent.  If there was
>> paint, I'd at least get some Rustoleum (clear) on it.  You could plate it,
>> assuming it's off the piano.
>> Paul McCloud
>> Sandy Ego
>>
>> ----- Original Message -----
>> From: "Noah Frere" <noahfrere at gmail.com>
>> To: pianotech at ptg.org
>> Sent: Wednesday, November 14, 2012 12:27:38 PM
>> Subject: [pianotech] Pressure Bar
>>
>> Hello! I sanded off the paint from a pressure bar (in case that's not the
>> right word) on an upright (the curved flattish piece that holds down the
>> strings just above the upper termination point). It is now very attractive,
>> bright steel. However, will it tarnish quicker if I don't finish it with
>> lacquer or something before I restring?
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121114/12164895/attachment.htm>