[pianotech] Steinway Lyre bolts...

[William Monroe]

Hi Paul,

Actually, no, the screw is $8.  The leg and lyre button is $23 for the
smaller grands, $34 for the B & D.

It's a pretty spendy little screw.

William R. Monroe



On Fri, Nov 23, 2012 at 7:45 AM, Paul McCloud <pmc033 at earthlink.net> wrote:

> Hi, Rob:
> Do you have the button/wedge?  Steinways have lock plates, so you'll need
> that wedge to make sure the leg stays in place, along with the screw.  You
> could make one, but it would take some time to get right.  Which is why the
> price is $8, 'cause it's not just the screw.
> Paul McCLoud
> San Diego
>
> ----- Original Message -----
> From: "Rob McCall" <rob at mccallpiano.com>
> To: pianotech at ptg.org
> Sent: Thursday, November 22, 2012 6:27:17 PM
> Subject: [pianotech] Steinway Lyre bolts...
>
> Greetings,
>
>
> I have a client with an 'M' that the movers lost the wood screws/ lag
> bolts for the pedal lyre.
>
>
> I found an $8 screw in the Steinway catalog, but I'm really hoping not to
> spend that much on a dang screw...
>
>
> In the catalog it says "screw - leg & lyre button/wedge 2-1/4". I'm
> guessing that's the part? So it sounds like it's 2-1/4" long. Does anyone
> have the dimensions (diam., thread count, etc.) and a photo, if possible,
> so I can hopefully pick up a couple of screws at the hardware store.
>
>
> Thanks,
>
>
>
>
>
>
>
> Regards,
>
>
> Rob McCall
>
>
> McCall Piano Service, LLC
> www.mccallpiano.com
> Murrieta, CA
> 951-698-1875
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121123/ba23a753/attachment.htm>