Or redesign. Traditionally it is rare but it certainly must have happened in the development stage for any manufacturer. Does it say something that manufacturers generally prefer to err on the side of lower impedance rather than higher impedance? David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Thursday, October 25, 2012 7:46 PM To: pianotech at ptg.org Subject: Re: [pianotech] Bridge agraffes FYI On 10/25/2012 9:22 PM, David Love wrote: > Or its companion of overcompensation and building assemblies that are > too stiff. Which is quite rare outside of experimental design. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC