Begin forwarded message: > From: Isaac Sadigursky <isaacspianoservice at gmail.com> > Date: October 26, 2012 8:35:17 PM PDT > To: Pianotech List <pianotech at ptg.org> > Subject: Re: [pianotech] Agraffe wrench > Reply-To: pianotech at ptg.org > > Ready made Agraffe T-Handle tool made by JAHN Co is sold by > Pianoteck.. > Works Great.. > Schaff still sells Combination tools T-handle. > Good Luck! > Isaac > On Oct 26, 2012, at 1:21 PM, Terry Farrell wrote: > >> At least ten years ago I bought an agraffe wrench that looks almost >> exactly like Ron's. I don't remember exactly where I bought it, but >> it had to have been from Schaff, Pianotek or American. >> >> Terry Farrell >> >> On Oct 26, 2012, at 2:57 PM, Ron Nossaman wrote: >> >>> On 10/26/2012 12:49 PM, Paul Mulik wrote: >>>> I removed a set of agraffes yesterday with the tool that fits in >>>> the >>>> combination handle, and it occurred to me that a much better design >>>> would have a T-handle at the top that one could turn with both >>>> hands, >>>> exactly like the wrench that plumbers use to shut off the water at >>>> the meter, only smaller. Does anyone know of a source for an >>>> agraffe >>>> tool like that? >>> >>> Make one. A cheap 3/8" socket extension, a piece of brass tubing >>> (K&S Engineering) from a hobby shop, and some time with a hack saw >>> and file. Excellent for removal, but WAY better for installing >>> agraffes as you can quickly spin them in and out for trial fitting. >>> Ron N >>> <Agraffe Wrench 2.jpg> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121026/8b1b9e6c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC