Just got this. Why? It's from a while ago! System hiccup? No clue. Anyway, I've thought about it and am going to make a similar tool, but with interchangeable heads for All the sizes needed.<G> Not that difficult to make, imo. Joe Date: Mon, 27 Aug 2012 01:16:08 -0400 (EDT) From: Dale Erwin <erwinspiano at aol.com> To: joegarrett at earthlink.net, pianotech at ptg.org Subject: Re: [pianotech] Neat tool - was action ratio Message-ID: <8CF522A321C68A7-1898-2846A at webmail-m093.sysops.aol.com> Content-Type: text/plain; charset="us-ascii" Already made and available in 2 sizes buddy. See attachment Dale Erwin R.P.T. Phone: 209-577-8397 From: Joseph Garrett <joegarrett at earthlink.net> To: pianotech <pianotech at ptg.org> Sent: Sun, Aug 26, 2012 7:55 pm Subject: [pianotech] Neat tool - was action ratio Erwin said: "(the Erwin dip gauge)" I say: "Ooooo neat, simple tool!<G> Got's ta make one a dem!<G> Or maybe several of different dimensions. I'm thinking double ended type thang. Regards, Joe Joe Garrett, R.P.T. Captain of the Tool Police Squares R I Joe Garrett, R.P.T. Captain of the Tool Police Squares R I
This PTG archive page provided courtesy of Moy Piano Service, LLC