[pianotech] Damper tray block

[Encore Pianos]

I don't detect a bias, I detect a conclusion.  

Will Truitt

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Mike Spalding
Sent: Saturday, September 29, 2012 1:41 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Damper tray block

Do I detect a bias in the wording of your question?

On 9/29/2012 11:44 AM, Ron Nossaman wrote:
> On 9/29/2012 11:19 AM, Jon Page wrote:
>> Having the underlevers (u/l) parallel at rest would still add sliding 
>> friction only it would also be crushing the corner of the felt when 
>> lifted.
>
> I don't suppose it would hurt to decide whether you wanted the least 
> friction at the beginning of the stroke when you need to get things 
> moving, or at the end where you are already moving and need to get 
> things to stop.
> Ron N
>