Hi Dave,Thank you for all of the info. This piano is an old Lester upright, so tall you'd have to work on it standing up. The best way I can describe it is by what I'm feeling. The reason I'm not sure if I access these screws from the back is due to the fact that when I put my finger on the brass rain at c88 where I can wedge my finger in from the side of the action bracket, I feel this screw that feels almost flush with the rail maybe a little recessed. Now on the area where the hammer is not only loose but just literally sitting there non functioning, I feel this little metal thing protruding out almost feels like the threaded end of a screw, but I cannot feel a head on it. This leads me to a couple of questions. How do I know if the plate is missing? I hear and feel the center pin click when I put in place. So does that mean the plate is present? do you remove the action in order to access this or do like some might do and just tilt it outward toward you in order to access the screw. Just in case anyone reading might wonder, I have had some exposure to this at the school. I just have trouble remembering which way the action was facing when we worked on this since it was already out of the piano. I mentinoed this because someone e-mailed Don at the school and asked if I was trained because of some trouble I was having with another repair, but I cannot recall which one it was. While I'm on this topic of remembering tasks, is this normal to neeed a refresher on tasks/repairs once in a whie? I also have the Reblitz book. I'm also curious as to how you guys know the part numbers off the top of you rhead like that amazing. Oh just order screwdriver # .... amazing! You guys are a great help. So to ease any confusion, this is definitly not a flange screw situation. It is a hammer but plate arangement. I've never seen this on an old upright before. We had an old upright at the school with a weird hammer spring rail that used cord loops or some sort of arrangement. I didn t work on this one, but I recall it might have been from an old Bell brand piano. Well thanks everyone!! I sure appreciate you guysMarshall Marshall Gisondi MARSHALL'S PIANO SERVICE 215-510-9400 http://www.phillytuner.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130201/d050a7c5/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC