Joe, Sorry...I didn't see you subsequent post. Thanks for the detail. Ron, thanks for referencing Micro-Mark website. I just bought a mini drill chuck. Nice ideas and thanks for sharing, John Parham > -------- Original Message -------- > Subject: Re: [pianotech] cracked/split jack birdseyes, etc. > From: Ron Nossaman <rnossaman at cox.net> > Date: Fri, February 15, 2013 3:17 pm > To: pianotech at ptg.org > > > On 2/15/2013 1:03 PM, Susan Kline wrote: > > Joe, that's an extremely cute trick with the pin vise and the drill press. > > Thanks for sharing it! > > I have a 0-1/4" chuck on a 3/8" shank that I've used forever for those > little bits in the drill press. More versatile than a pin vise, and > harder to lose. For me, that's a factor. > > Or you can go to Micro-Mark and get a #81852 #59-1/8" chuck on a hex > shank that will go in either your cordless screwdriver or drill press, > for $11.50. > > Lots of ways to skin this moose. > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC