[pianotech] Large Diameter Hinge Pins

[Jon Page]

To recap the story, someone had their Weinbach moved and the movers lost 
the hinge pins. The pins measured .210", quite large. I borrowed the 
pins from a Howard grand (Samick) that I have in my shop. However Samick 
no longer carries these and I haven't heard back from Petrof (Weinback). 
So, I made two pins out of 3/16" rod and 7/32" tubing. photo att.

Jane was most helpful with this and other parts I wanted but there still 
was a long delay due to a constant change in personnel in the parts dept.

Regards,

Jon Page


PS: resent to correct the heading for the archive search
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Large diameter hinge pins.jpg
Type: image/jpeg
Size: 48425 bytes
Desc: not available
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130216/856f12dc/attachment-0001.jpg>