[pianotech] Bending Sostenuto mounts

[David Love]

That's what I wanted to know, thanks.

David Love
www.davidlovepianos.com


-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jon Page
Sent: Sunday, February 17, 2013 4:13 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Bending Sostenuto mounts

They do bend and they do break, damhik. 3mm is too far to hope to bend, plug
the hole and redrill. Attached is a workaround for a broken bracket. A T-nut
fastener saved the day, I forget the purpose for the threaded rod.

--
Regards,

Jon Page