Hi, John! Try to get in touch with 2 top player techs in Los Angeles they might be able to help you; Randy Cox 562-431-8338 Vince Wikmur 949-977-1527.. Good Luck! Isaac Sadigursky, RPT Los Angeles On Feb 23, 2013, at 3:38 PM, John Ross wrote: > It appears that I am looking for, either the dimensions to have one > made, or replacement pulleys for a steamboat pump. > John Ross > Windsor, Nova Scotia > > Begin forwarded message: > >> From: John Ross <jrpiano at bellaliant.net> >> Subject: Re Player Piano >> Date: 23 February, 2013 5:49:01 PM AST >> To: Pianotech List <pianotech at ptg.org> >> >> I have a Duo-Art Pianola, upright Weber piano, that was given to me. >> I am intending to fix it up for my own use. >> I have ran into my first problem, a major one. >> It seems as if pot metal problems have been with us for a while. >> The two pulleys, one on the motor and one on the pump, will >> disintegrate if I touch them. They are all swelled and cracked. >> Is there a source for them? Obviously more specifics would be >> forthcoming. >> One is double channelled, the other is triple channelled. >> Any information would be appreciated. >> John Ross >> Windsor, Nova Scotia >> >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130223/63ede4f5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC