[pianotech] grommets

[lim hock seng]

Thank you again for this tip,Mr Issac!
On Mar 1, 2013 9:59 AM, "Isaac Sadigursky" <isaacspianoservice at gmail.com>
wrote:

> Wim and Marshall!
> You can use those 'Donut" Grommets as a mute between newly replaced
> strings..
> Radio Shack sells them in different sizes, too..Check it out for wider
> spaced unisons..
> I had learned that trick from Bruce Stevens, RPT-S..Bay Chapter..
> It Works!!
> It made it as a Tech. Tip in the Journal a few years back..
> Just a reminder...
> Good luck!
> Isaac
> On Feb 28, 2013, at 5:38 PM, tnrwim at aol.com wrote:
>
> Marshall
>
> Baldwin grommets are round donuts. (Schaff part number 3784, page 130). I
> would suggest you order two or three sets, so that you can do the repairs
> right away, without waiting to get them from Schaff.
>
> Wim
>
>   -----Original Message-----
> From: Marshall Gisondi <pianotune05 at hotmail.com>
> To: pianotech <pianotech at ptg.org>; rayfabrizio1952 <
> rayfabrizio1952 at gmail.com>
> Sent: Thu, Feb 28, 2013 2:59 pm
> Subject: [pianotech] grommets
>
>  Hi Terry,
> What type of grommets are used on the Baldwin spinets, the round or
> squareish ones?  I have a customer who called and said that a key was down
> on her Baldwin spinet and I'm thinking rubber grommet issue.  I've seen
> both types of grommets, round washer type and a square tye, but cannot
> recall which pianos I"ve seen these on..  Thanks
> Marshall
>
>
> *Marshall Gisondi*
> *MARSHALL'S PIANO SERVICE*
> *215-510-9400*
> *http://www.phillytuner.com *
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130301/241fe6c8/attachment.htm>