<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=us-ascii">
<META content="MSHTML 6.00.2600.0" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=297440707-23092002><FONT face=Arial color=#0000ff =
size=2>Good
screwing of the plate have shown 3 cts raise and =
more.</FONT></SPAN></DIV>
<DIV><SPAN class=297440707-23092002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=297440707-23092002><FONT face=Arial color=#0000ff =
size=2>Isaac
OLEG</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px =
solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT =
face=Tahoma
size=2>-----Message d'origine-----<BR><B>De :</B>
pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]<B>De la =
part
de</B> Donald Mannino<BR><B>Envoyé :</B> lundi 23 =
septembre 2002
05:42<BR><B>À :</B> Pianotech<BR><B>Objet :</B> Re: =
Yamaha Tuning
Instability<BR><BR></FONT></DIV><FONT size=3>Terry,<BR><BR>There are =
always so
many factors involved with tuning instability, it's really hard to =
solve
something like this. In addition to what others have written, =
keep in
mind the following generalizations, which might be contributing
factors:<BR><BR>- A smaller soundboard tends to react less to humidity =
changes
than a larger one.<BR>- An old soundboard tends to react less to =
humidity
changes than a new one.<BR><BR>The pinblock gap at the plate flange is =
not
likely to be the issue, as Yamaha grand pinblocks in the past were not =
fit to
the flange. Some pianos would go together with some contact, but =
many did not contact the flange at all. Same is true for =
Kawai, by
the way. I believe Yamaha later changed to doing a =
resin
fit, but I am not sure what they are doing now. In any case, =
these
pianos usually hold tuning just fine without having the pinblock fit =
to the
flange.<BR><BR>If you are going to wedge the gap, I would recommend =
lowering
tension and tightening the plate screws first.<BR><BR>Have you not =
already
tightened the plate screws? If not, it might be good to simply =
do that
and see how the piano holds before taking more elaborate =
steps.<BR><BR>Don
Mannino RPT<BR><BR>At 06:26 PM 9/22/2002 -0400, you wrote:<BR>
<BLOCKQUOTE class=cite cite="" type="cite">My son's piano =
teacher has a 1983
Yamaha G5 (6' 7") grey market piano. Other than tuning instability, =
the
piano is in VERY good condition. She also has a 1930ish Aeolian =
4'some"
microgrand in the same room. I have tuned both pianos several times =
at six
month intervals. The Yamaha consistently goes out of tune =
significantly more
quickly than the microgrand. No RH monitoring and no DC (on either =
piano).
The Yamaha does have business card gaps between the pinblock and the =
flange.<BR><BR>I will be servicing both these pianos two weeks from =
now. I
plan to check the rim screws and pinblock/flange fit on the Yamaha. =
I will
shim any pinblock/flange gaps I can find. She is going to start =
monitoring
RH in the room. But keep in mind, the Yamaha goes much more quickly =
out of
tune than the microgrand. Any other suggestions for things to look =
for? This
is a significant problem for this piano owner. I need to solve it. =
Any input
will be greatly appreciated.<BR><BR>Thanks.<BR><BR>Terry =
Farrell<BR>
<BR><BR>_______________________________________________<BR>pianotech =
list
info: <A href="https://www.moypiano.com/resources/#archives"
eudora="autourl">https://www.moypiano.com/resources/#archives</A> =
</FONT></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>