<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Sand/file the metal to roughen it. Then =
wet with
unthickened epoxy. Then sand the wet epoxy into the metal with 80 grit =
paper.
Then apply epoxy thickened with high-strength bonding filler. Strong as
steel.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=jrpiano@win.eastlink.ca =
href="mailto:jrpiano@win.eastlink.ca">John
Ross</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, October 21, =
2004 5:55
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Vertical Damper =
Lift
Rail</DIV>
<DIV><BR></DIV>
<DIV><STRONG><FONT face=Arial>Hi Terry,</FONT></STRONG></DIV>
<DIV><STRONG><FONT face=Arial>I am surprised, you were able to get a =
good bond
with the epoxy, on the metal to metal. I thought epoxy needed some
roughness?</FONT></STRONG></DIV>
<DIV><STRONG><FONT face=Arial>I usually solder, although, I think =
siver solder
would be better.</FONT></STRONG></DIV>
<DIV><STRONG><FONT face=Arial>Kawai, will send you the pins, after =
the first
one, I got some spares. As to be expected, non have gone
since.</FONT></STRONG></DIV>
<DIV><STRONG><FONT face=Arial>Regards,</FONT></STRONG></DIV>
<DIV>John M. Ross<BR>Windsor, Nova Scotia, Canada<BR><A
=
href="mailto:jrpiano@win.eastlink.ca">jrpiano@win.eastlink.ca</A></DIV>=
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=mfarrel2@tampabay.rr.com
href="mailto:mfarrel2@tampabay.rr.com">Farrell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, October 21, =
2004 6:42
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Vertical Damper Lift =
Rail</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I repaired a vertical damper lift =
rail the
other day. Typical thing where one of three little steel L-shaped =
hookies
that pivots in a flange broke off. I just made the appointment =
to
re-install the rail and the guy asked me what the charge was. I told =
him. He
didn't sound happy at all. I am expecting..... shall we say a =
difference of
opinions? My question (before I tell what my charge is/was) is =
how much
time would you charge at your normal hourly rate for such a
repair?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I'm in Florida and rates are pretty =
consistent
here with most of the mid-west. I typically charge $60 an hour for =
on-site
service work and $50 an hour for shop work. And I think I gave him a =
good
deal actually.......</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The piano is a recent model =
Kawai.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The tasks I had to do:</FONT></DIV>
<DIV><FONT face=Arial size=2>1 - diagnose problem (pretty fast =
on that
one)</FONT></DIV>
<DIV><FONT face=Arial size=2>2 - remove action</FONT></DIV>
<DIV><FONT face=Arial size=2>3 - remove damper rail</FONT></DIV>
<DIV><FONT face=Arial size=2>4 - replace action</FONT></DIV>
<DIV><FONT face=Arial size=2>(I tuned the piano at this =
first visit -
so no need to charge for a service call specifically to remove the =
damper
rail.)</FONT></DIV>
<DIV><FONT face=Arial size=2>5 - repair rail (make new L-shaped =
pin, drill
hole in rod, epoxy pin in place)</FONT></DIV>
<DIV><FONT face=Arial size=2>6 - service call to remove action, =
install
rail, re-install action (25-mile round trip - I wasn't scheduled to =
go out
that way for two weeks and the girl that plays the piano is active =
on the
piano and so she wanted it back together ASAP - so this was a =
special
service call to that area.)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks for any input.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry
Farrell</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>