<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>I recently assessed a Baldwin D with accu hitch =
pins.
After measuring the bearing in several places I found that the piano =
generally
was set up with negative rear bearing (Lowell Gauge). I am =
considering
adjusting the rear bearing in order to get the overall bearing where I =
want
it. What is the general procedure for doing this? Does one =
measure
each string in each section? Or is there a way to set the end =
strings, for
example, of each section and somehow put all the strings on the same
plane? Do you have to let off the tension to move the string down =
(in this
case) the hitch pin? Or can I just tap it down with a brass =
rod?
Input is appreciated.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>David Love</FONT></DIV></BODY></HTML>