<html> <body> <pre>>...So, the knuckle location had to be changed...extracting the hammers and rehanging them >on new shanks and flanges with a different knuckle location.  This was a >lot more money than 2 or 3 hours of my time and a set of knuckles. Why not put identical weight hammers on new shanks. (Unless the shank length is not generic). This way you have a prehung set for some other job. <x-sigsep><p></x-sigsep> Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. <a href="mailto:jonpage@comcast.net" eudora="autourl">mailto:jonpage@comcast.net </a>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</body> </html>