<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=us-ascii"> <meta name=Generator content="Microsoft Word 10 (filtered)"> <style>  </style> </head> <body bgcolor=white lang=EN-US link=blue vlink=purple> <div class=Section1> Doesn’t Bill Spurlock have a = method that he’s published?   <div> David Love davidlovepianos@comcast.net </div> -----Original = Message----- From: = pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Farrell Sent: Saturday, February = 04, 2006 8:02 PM To: pianotech@ptg.org Subject: Key Button = Installation   <div> I need to install new key = buttons on 88 keys. Never done it before. I have the Journals on CD, but have never = been able to do a search on them. I found an old article by Fern Henry that described a very simple method/jig to do this task. The few = articles I have found suggest that many techs prefer to replace button = rather than rebush and complete the task in about two hours. In two hours, following a modified Fern Henry method, I have eight keys done. = I've got 80 to go. At this pace it will take me the better part of = a week to install a set of key buttons. Is anyone aware of a good article in = the PTG Journal that describes the procedure? I see the Jaras Key = Button jig in the Schaff catalog - anyone have an opinion on that? Anyone got any = other favorite/excellent-result/fast method of replacing key = buttons? </div> <div>   </div> <div> Thanks for any = input. </div> <div>   </div> <div> Terry = Farrell </div> </div> </body> </html>