<BODY><P align=left><FONT face=arial,helvetica><FONT size=2>I couldn't see the need for this device so I sold mine years ago...good way to screw up the birdseye!</FONT></FONT></P>
<P align=left><FONT face=Arial size=2>David I.</FONT></P>
<P align=left><FONT face=Arial size=2></FONT> </P>
<P align=left> </P>
<P align=left><FONT face=arial,helvetica><FONT size=2>---- Original message ----------------------------------------><BR>From: <<A href="mailto:BobRussellpiano@AOL.COM">BobRussellpiano@AOL.COM</A>><BR>To: <<A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>><BR>Received: Mon, 24 Jun 2002 23:35:24 EDT<BR>Subject: Re: Slow hammer return</FONT></FONT></P>
<P align=left><FONT face=arial,helvetica><FONT size=2><BR>Question, how hot does the center pin get, and how long does the treatment last? <BR>I've used a sodering iron with a fin tip attached and put it on each side of the center pin for 2 to 4 seconds. This worked well for a year or so. <BR><BR>Bob Russell, RPT</FONT> </FONT></P></BODY>><FONT FACE=arial,helvetica><FONT SIZE=2>Question, how hot does the center pin get, and how long does the treatment last?
<BR>I've used a sodering iron with a fin tip attached and put it on each side of the center pin for 2 to 4 seconds. This worked well for a year or so.
<BR>
<BR>Bob Russell, RPT</FONT></HTML>