<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2604" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#d8d0c8> <DIV><FONT size=2>I've reviewed the archives on stage truck = installation and removal, but there seems to be a missing step.</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>On a grand, when removing a stage truck, you block = the front arms of the truck (so it doesn't tip up), then jack up one of the front = legs of the piano and install the caster.  Before you can drop that first = leg to the floor, it seems that you must loosen the center bolts of the stage = truck and pivot that first arm out of the way, so the caster can reach the = floor... right?</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>Then, when jacking up the other side of the piano, = when the second leg is free of the stage truck, the truck can be pivoted away = without loosening any more bolts, because only the rear leg is on it... correct?</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>--Cy Shuster--</FONT></DIV> <DIV><FONT size=2>Bluefield, WV</FONT></DIV> <DIV> </DIV></BODY></HTML>