<html>
Hazen and Newton,<br>
<x-tab> </x-tab>I've tuned
for these churches before and no amount of work will save breakage of
some kind. If you dummy down the regulation you get broken action parts.
If you leave it alone you get broken strings. Take your pick. About the
only advice I could ever give them was to get a monitor speaker and point
it right at the piano player so they can hear themselves. That was right
before I stopped doing that kind of work. <br><br>
Greg Newell<br><br>
<br>
At 04:25 PM 5/12/2002, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>In a
message dated 05/12/2002 4:17:21 PM Eastern Daylight Time,
nhunt@optonline.net writes: <br><br>
<br>
<blockquote type=cite class=cite cite>You might consider deregulating the
action to reduce the power. Shorten blow <br>
distance, shorten dip and set the let-off at 1/4" instead of
1/8" and have the <br>
church put a monitor speaker with the volume set high right at the
players ear <br>
level. That helps a lot! <br><br>
Newton <br>
</font><font size=2 color="#0F0F0F"><br>
</blockquote><br>
</font><font size=2><br>
Hi Newton,list, <br>
The piano is about three feet from a drum set,and right behind two
guitar amps.I told them I would bring back a pickup for the piano,to try
out,as it could not keep up with its neighbors volume wise.I will also
check the regulation you suggested as well. <br>
Thanks, <br>
Hazen Bannister </font> </blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
<a href="mailto:gnewell@ameritech.net" eudora="autourl">mailto:gnewell@ameritech.net</a></html>