<html>
<body>
Mike,<br>
<x-tab>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</x-tab>I don't
believe that I would lower the tension at all. (Fools go where angels
fear to tread and all that) :-) The tightening of the pressure bar screws
is not likely to be that great anyway. If you find yourself making a
major tightening I think that something is very amiss here. perhaps a max
turn of a half way around should be more than adequate. That will raise
the pitch to be sure but I don't think that you're in any danger. You
could always depress and hold the damper pedal, pluck a string and turn
the screw. Your ears will certainly tell you what's going on. What's that
old axium? Know What You Are Doing and Why You Are Doing It. KWYADAWYADI.
Re: #4 I don't think you have to worry about the depth of the hole
either. <br><br>
Best,<br>
Greg Newell<br><br>
<br><br>
<br><br>
At 08:08 PM 2/24/2004, you wrote:<br><br>
<blockquote type=cite class=cite cite>I would like to clean up the
metallic sounds and occasional buzzing that occur when the notes between
A4 and A5 are initially played on a Baldwin Hamilton that is about 3
years old.&nbsp; This seems to be the result of the pressure bar being
too high.&nbsp; I came to this conclusion by doing the
following:<br><br>
1)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Checking the height on the
pressure bar using the method described in this article by Kent Webb
<a href="https://www.moypiano.com/ptg/pianotech.php/attachments/53/99/87/2f/at=
tachment.bin"><u>https://www.moypiano.com/ptg/pianotech.php/attachments/53/99/87=
/2f/attachment.bin</a></u>
(found to be too high);<br><br>
2)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Applying pressure between the V-Bar=
 and the pressure bar (stopped the metallic sound).<br><br>
I would like to lower the pressure bar and have the following=
 questions:<br><br>
1)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; How low should the pitch be dropped =
– by a certain number of cents or turns on the tuning pin?<br><br>
2)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Should the pitch be lowered in=
 steps?<br><br>
3)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Should the bass be dropped also?<br><br>
4)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Once the pitch is dropped, is it safe to=
 remove one screw at a time to check if the hole is deep enough and to apply=
 bees wax for lubrication?<br><br>
&nbsp;<br><br>
Thanks very much.<br><br>
Mike Lud<br><br>
&nbsp;<br><br>
---<br>
Incoming mail is certified Virus Free.<br>
Checked by AVG anti-virus system (<a href="http://www.grisoft.com/"=
 eudora="autourl">http://www.grisoft.com</a>).<br>
Version: 6.0.588 / Virus Database: 372 - Release Date:=
 2/13/2004</blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
Greg's piano Forté<br>
<a href="mailto:gnewell@ameritech.net"=
 eudora="autourl">mailto:gnewell@ameritech.net</a></body>
</html>