<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Del,<BR>
<BR>
I never thought of this as an option for high end instruments, as you said, this is really a solution for low end pianos.<BR>
<BR>
One other thought which I will take a closer look at when I go and tune the small grand in a couple of weeks. For whatever reason the epoxy behind the bass bridge would not cure after several days. In the end I scraped it off down to the bare wood. I have no way of knowing what, if any, penetration occurred but I suspect very little. You had mentioned in your article the possibility of doing this treatment on only certain areas of the soundboard, since I essentially did that by accident I will let you know if I think it had any noticeable impact. <BR>
<BR>
<BR>
<BR>
Andrew Remillard<BR>
ANRPiano.com</FONT></HTML>