<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<p>BobDavis88@aol.com wrote<font face="Arial"><font size=-1>Terry Farrell
writes:</font></font>
<blockquote TYPE=CITE>
<br><font face="Arial"><font color="#000000"><font size=-1>We have used
many Bolduc blocks, and like them. We used several sets of 1/0 pins, and
I decided that I don't like the feel in non-bushed pianos, so we went back
to 2/0. I drill .250 in one pass, and come out about 120-130 inch pounds
right after. I'm surprised Terry's are coming out that tight.</font></font></font>
<br><font face="Arial"><font color="#000000"><font size=-1>Bob Davis</font></font></font></blockquote>
<p><br>Hi Bob.
<p>Im curious as to whether or not you are drilling by hand or using a
mounted press... or what.
<p>Cheers
<br>RicB
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br> </html>