<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re: Castor Sockets</title></head><body> <blockquote type="cite" cite> <blockquote type="cite" cite><font size="-1">... Am fitting Grand Leg Dollies ... The existing sockets are too short in the spindle hole.  Schaff catalogue says 'Quickly mounted with standard socket'</font></blockquote> <blockquote type="cite" cite><font size="-1">What are standard sockets ?</font> ...<font size="-1"> Tony Caught</font></blockquote> </blockquote> <blockquote type="cite" cite> </blockquote> <blockquote type="cite" cite>Tony,</blockquote> <blockquote type="cite" cite><br></blockquote> <blockquote type="cite" cite>CR3A Pressed Steel Sockets, page 136.</blockquote> <blockquote type="cite" cite><br></blockquote> <blockquote type="cite" cite>Keith McGavern</blockquote> <div><br></div> <div>Tony,</div> <div><br></div> <div>Some additional information for your consideration:</div> <div><br></div> <div>You might just try removing the existing sockets and use the empty hole. If that's too short, you can make it deeper.</div> <div><br></div> <div>I have on occasion installed the dollies without sockets and have encountered no problems doing such an thing.</div> <div><br></div> <div>Keith McGavern<br> Registered Piano Technician<br> Oklahoma Chapter 731<br> Piano Technicians Guild</div> <div>USA</div> </body> </html>