<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1505" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Arial"
bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 =
rightMargin=7>
<DIV>Hi Dale, </DIV>
<DIV>You give very good advise in its use.About 1500 people have so far
<G></DIV>
<DIV>One thing you might consider is leveling strings with the dampers =
out.
</DIV>
<DIV>There might be another point or two on my site, directions for =
use.</DIV>
<DIV>Thanks for the plug </DIV>
<DIV> </DIV>
<DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DI=
V>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=Erwinspiano@aol.com
href="mailto:Erwinspiano@aol.com">Erwinspiano@aol.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, September 12, =
2005 8:13
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Mother goose string
leveler</DIV>
<DIV><BR></DIV><FONT id=role_document face=Arial color=#000000 =
size=2>
<DIV><FONT size=3> To all level headed tech's</FONT></DIV>
<DIV><FONT size=3> I have been using Joe's slick little tool =
for a while
now & It has taken the archaic out of the mundane job of string =
leveling.
It tells an accurate story right off the git go. However it's wise to =
see if
the keybed/piano are truly level first & if not get them =
into
compliance. I use a long aluminum bubble level when in shop. In =
the
field a put the gauge on the stretcher or keybed as quick
references.</FONT></DIV>
<DIV><FONT size=3> I've noticed it is important to put the =
device as
close to the striking spot on the string for accuracy as it is =
level
strings at the hammer strike point I want. It's also important to =
make
sure it sits squarely on the unison & not sitting off to one side =
or the
other as the weight of the gauge will depress a string to sit =
lower due
to its own weight giving a false reading.</FONT></DIV>
<DIV><FONT size=3> I usually place the gauge on the unison =
& lift
the lowest outside string string first then the other outside =
string
then the middle till the bubble in the gauge centers. Then work in the =
middle
one. With this gauge It's real obvious when the middle string is =
to high
as gauge kind of quivers for a lengthy period of time ,rocking on the =
high
middle string.</FONT></DIV>
<DIV><FONT size=3> Although my finger & eyes are quit good =
at
roughing things in the fine stuff is way easier to dial in =
with
the gauge. It doesn't lie or give subjective readings.</FONT></DIV>
<DIV><FONT size=3> It's fun Joe thanks. Anybody else =
discover this
little Jem?</FONT></DIV>
<DIV><FONT size=3> Dale Erwin
<DIV> </DIV>
<DIV><FONT lang=0 face=Arial size=2 PTSIZE="10" =
FAMILY="SANSSERIF">Erwins
Pianos Restorations <BR>4721 Parker Rd.<BR>Modesto, Ca
95357<BR>209-577-8397<BR>Rebuilt Steinway , Mason &Hamlin
=
Sales<BR>www.Erwinspiano.com</FONT></DIV></FONT></DIV></BLOCKQUOTE></FONT=
></BODY></HTML>