<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Looked at a 1962 Wurly spinet today =
with the rubber
nuts on the key ends. Of course, the rubber was hard and brittle. =
However, in
this case, the rubber seemed to also be fused to both the metal fork =
thing on
the key end as well as the threaded rod that goes to the wippen. I've =
replaced
sets of rubber nuts before, but only when they came off reasonably easy. =
This
appears to me to have the potential to be a time consuming nightmare of =
a job
where each fork and each threaded rod would require quite a bit of =
tedious
cleaning of hard rubber before installing and adjusting the new
nuts.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Anyone with experience with this =
situation have any
advice? Thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry =
Farrell</FONT></DIV></BODY></HTML>