<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1491" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>Hi
Terry, </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>You're
thinking right. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>STEP
3: The solenoids are in groups, screwed to aluminum rails, which are =
hanging on
nuts and bolts. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>Take
good measurements of the current position of the solenoid tips, fore and =
aft, up
and down; so you can get them back in position. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>You
might have enough room on the hanger bolts to simply lower the solenoid =
rails,
but not have to remove. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>If you
need to remove, set up some kind of platform just under them, lengthwise =
along
the keybed, to set them on temporarily. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>(The
wiring may or may not allow you enough room to set them on the floor).
</FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>STEP
2: To access the nuts/bolts, you'll need to remove the solenoid rail =
cover...big
metal black box. Usually attached with long Philips screws in the four =
corners
of the box. </FONT></SPAN><SPAN class=531520612-15032005><FONT =
face=Arial
color=#0000ff size=2>It will have wires attached, but they should be =
long enough
to allow you to set it on the floor. </FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>(As
above, you might find it helpful to create a platform to set it on).
</FONT></SPAN></DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=531520612-15032005><FONT face=Arial color=#0000ff =
size=2>STEP
1: Oh, and yes you should unplug it, no need to make your hair frizzy.
</FONT></SPAN></DIV>
<DIV><FONT face=Arial color=#0000ff size=2></FONT> </DIV>
<P><FONT size=2>Best regards,<BR>Brad Smith, RPT<BR></FONT><A
href="http://www.smithpiano.com"><FONT
size=2>www.smithpiano.com</FONT></A><BR><FONT size=2><FONT =
face=Arial><SPAN
class=531520612-15032005><FONT =
color=#0000ff></FONT></SPAN></FONT></FONT></P>
<P><FONT size=2><FONT face=Arial><SPAN
class=531520612-15032005> </SPAN></FONT></FONT></P>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV><FONT face=Arial size=2>So, the question is: How difficult is =
it to
remove/re-install the PianoDisk plunger rail - and if it is a =
reasonably thing
to do, any tips? My guess is that I could figure it out on my own - I =
imagine
just a few nuts/bolts/screws to remove the thing just drops down =
(unplug
first!) - but I also figure it is always best to ask someone that has =
done
this before. Anyone?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry
Farrell</FONT></DIV></BLOCKQUOTE></BODY></HTML>