<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1458" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#d8d0c8>
<DIV><FONT size=2>I tuned a 1975 Kimball console yesterday with a =
Schwander
action. It's in good condition inside and out, except it was 110c =
flat in
some sections. About half a dozen keys wouldn't play, because the =
jack
wouldn't return under the butt. Regulation was OK.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Stretching the jack return springs fixed the problem =
on some
notes, but not all. From what I could see, there was a center pin =
in the
jack, but no bushing (none that showed, anyway). Is the right fix =
a new
spring, repinning, or lubing the action center?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>--Cy Shuster--</FONT></DIV>
<DIV><FONT size=2>Bluefield, WV</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV> </DIV></BODY></HTML>