<html>
At 09:30 AM 12/13/2004 -0800, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>Terry: I
found a set of nut drivers at my local hardware store that had both
sizes. I also use the adjustable tool sold in the supply catalog in my
combo handle or in a drill. I believe it is Schaff's #3333
.</font><br>
<font face="arial" size=2>Patrick C. Poulson<br>
Registered Piano Technician<br>
Piano Technicians Guild</font>
<dl></blockquote>
</dl><br>
Also, Terry, for versatility, you can take the nut off of a shank cleaner
and spread the tines a bit. Throw it in a drill or a combo handle. It
won't tear 'em up too bad if you avoid rocking.<br><br>
Guy<br><br>
<blockquote type=cite class=cite cite>
<dl>
<dd>----- Original Message -----
<dd>From:</b> <a href="mailto:terry@farrellpiano.com">Terry</a>
<dd>To:</b> <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
<dd>Sent:</b> Monday, December 13, 2004 8:56 AM
<dd>Subject:</b> Square Nut Driver<br><br>
<font face="arial" size=2>
<dd>I'm having trouble finding square nut drivers for 1/4" &
5/16" nuts - the rubber nuts one finds on some spinets. Any
ideas?</font>
<dd> <font face="arial" size=2>
<dd>Supply houses don't list 'em in catalogs. McMaster-Carr doesn't seem
to have them. Haven't found anything on a google search.</font>
<dd> <font face="arial" size=2>
<dd>Terry Farrell</font>
</dl></blockquote></html>