<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
I've tried a bunch of different approaches... and find that the easiest
is to remove, trim, and replace each damper one at a time. Use a really
sharp and solid cutting pair of medium small scizzors.
<p>RicB
<p>Clark Sprague wrote:
<blockquote TYPE=CITE><style></style>
<font face="Arial"><font size=-1>List,
Anybody out there have a good suggestion for a trimming shears or something
to trim too long tri-chord double wedge dampers that hang too far beyond
the bottom of the string level? Customer complaining of too much
Zing.</font></font> <font face="Arial"><font size=-1>Clark Sprague</font></font></blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br>
</body>
</html>