<HTML><HEAD>
<META http-equiv=Content-Type content="text/html;=
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1491" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>I can imagine rust could be=
problem...<BR><BR>David Ilvedson<BR><BR><BR><BR><BR>
<DIV style="PADDING-RIGHT: 5px; PADDING-LEFT: 5px;=
PADDING-BOTTOM: 5px; BORDER-LEFT: #000000 3px solid;=
PADDING-TOP: 5px">
<HR>
Original message<BR>From: Mike Kurta <MKURTA@ADELPHIA.NET><BR>To:=
Pianotech <PIANOTECH@PTG.ORG><BR>Received: Wed, 20 Jul 2005=
15:51:22 -0400<BR>Subject: Re: Wegman Tuning Pin System<BR><BR>
<DIV align=left><FONT face=Arial size=2> As the=
(unofficial) spokesman for the Wegman piano (they were made in=
our town), I'll try to answer your question. The=
tuning pin system Wegman used consisted of a conventional plate=
with carefully drilled holes that the very short, smooth=
tuning pins would fit into. There was no pinblock, and the=
pins were a slip fit. The pull of the=
string in one direction would create enough friction on the=
pin so that it would stay in one place but still be able to=
be rotated for tuning. There is some controversey=
about whether the holes in the plate are oval or round, but=
either way, the pins jam and remain in one place. =
</FONT></DIV>
<DIV><FONT face=Arial size=2> Tuning is done in=
the conventional manner, changing strings is a bit tricky, but=
with a little practice is easy to master, as the tuning pin=
stays loose until there is tension applied by the string as it=
is tightened up. The system seemed to be a good one as=
pins never loosened, and I'm not sure why it has=
disappeared from the piano industry. </FONT></DIV>
<DIV><FONT face=Arial size=2> Mike=
Kurta, Auburn, NY </FONT></DIV>
<DIV><FONT face=Arial size=2> Home of the=
Wegman piano.</FONT></DIV></DIV></BODY></HTML>