<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body bgcolor="#FFFFFF"> <blockquote TYPE=CITE>Pianotech friends, I am sending this message to you because I just got it from a relative and believe it may save some of you some big headaches tomorrow. When I received this and checked my computers I found they both needed to be changed, even though I had them both checked for Y2K compatibility many months ago.  I don't know how important this is, but I fixed mine and I recommend you check yours.  If you are running Windows, this is an easy  fix for a Y2K problem everyone should do, so I'm told. Regards, Clyde Hollinger, RPT TEST 1 . Double click on "My Computer". 2. Double click on "Control Panel". 3. Double click on "Regional Settings" icon. 4. Click on the "Date" tab at the top of the page. 5. Where it says, "Short Date Sample", look and see if it shows a "two digit" year. It probably does. That's the default setting for Windows 95, Windows 98 and NT. This date RIGHT HERE is the date that feeds application software and WILL NOT rollover in the year 2000. It will roll over to 00. 6. Click the drop-down arrow to the right of "Short Date Style" 7. Select the option mm/dd/yyyy. (Be sure your selection has four Y's, not two) 8. Click "OK". Easy enough to fix. However, every single installation of Windows worldwide is defaulted to fail Y2K rollover. Please feel free to pass this on to your friends and associates.    </blockquote> </body> </html>