<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Well, now that you have nice clean = flat surfaces, you have to pick the right thickness bushing cloth for the = hole and pin. If you are unlucky enough not to be able to use Spurlocks mortise = sizing cauls, you can fit them individually or some will be tight and require easing.</FONT></DIV> <DIV><FONT face=Arial size=2>Keith R</FONT></DIV> <BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=FIXPIANOS@aol.com href="mailto:FIXPIANOS@aol.com">FIXPIANOS@aol.com</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, February 16, 2003 = 9:51 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Sizing front rail pin holes</DIV> <DIV><BR></DIV><FONT face=arial,helvetica><FONT lang=0 = face=Arial size=3 FAMILY="SANSSERIF">What are some suggestions for sizing loose front = rail pin holes. I've done the hide glue solution and thought there might be a = better way.<BR><BR>Thanks.<BR><BR>Donn Young, RPT</FONT> </FONT></BLOCKQUOTE></BODY></HTML>