<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=us-ascii"> <meta name=Generator content="Microsoft Word 10 (filtered)"> <style>  </style> </head> <body bgcolor=white lang=EN-US link=blue vlink=purple> <div class=Section1> Sorry I would rather send this to = the person not the list.  But his email doesn’t appear in the = Header that pops up when you press “reply”.   I have been = off the list for a while, (a year?) I don’t recognize = “pianotech-bounces” or “On behalf of Terry”.   I remember it used to = be you could email to the sender alone, the list, or the sender and list.  = But how do you do it in this format?  One more reason for an edited = email list.  I am working on the mechanics and sending out hints and = feelers before taking the “official commitment.   ---ric  <a href="http://www.pnotec.com/">www.pnotec.com</a> =    (the E stands for edited)   See below for response….. =       -----Original = Message----- From: = pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Terry Sent: Thursday, March 24, 2005 8:01 = AM To: Pianotech Subject: Re: Steinway = with reverse crown   <div> ---ric  “The condition you describe, it seems would tend to  pull the strings up = off the bridge pins or be pulling the pins out of the = bridge.”           =             &= nbsp;    Terry “No, it wouldn't do that at all. In my original post I stated that there was = plenty of downbearing.” ……………&= #8230;………………………&#82= 30;…………………………= …………………………&#8= 230;….         =       Sorry for my confusion, the post I was quoting from was  </fo= nt>   &nbsp= ;            =          -----Original Message----- From: = pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Terry Sent: Monday, March 21, 2005 9:15 = AM To: Pianotech<fon= t size=2 face=Tahoma> Subject: Re: New = Baldwin           =             &= nbsp;     I didn’t know there was a preceding post.  How can I find it? =       =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;     --ric        =             &= nbsp;     =              <a href="http://www.pnotec.com/">www.pnotec.com</a>   (in = the works the edited pnotecElist)       </div> </div> </body> </html>