<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <meta name=Generator content="Microsoft Word 10 (filtered)"> <style>  </style> </head> <body bgcolor=white lang=EN-US link=blue vlink=purple> <div class=Section1> Yes, thin CA. What you see might surprise you. When you apply CA at the top of the rib it might run all the way through and out the bottom on what looks like a tight joint. When I see that happen I’ll use accelerator to make sure glue sets up in the void before it all runs out.   I’ve also applied it to bridge joints. Sometimes you’ll see the glue suck right in.   <div> Dean Dean May             cell 812.239.3359 PianoRebuilders.com   812.235.5272 Terre Haute IN  47802 </div>   -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Kenny Finlayson Sent: Wednesday, March 15, 2006 3:12 AM To: pianotech@ptg.org Subject: Ca glue on ribs   <div> Thanks Dean: </div> <div>   </div> <div> Ca glue along the ribs, and around the edge of the soundboard? I never thought of that. Sounds real. You're using thin, right? </div> <div> I have used ca thin on about a dozen piano pinblocks, applying around the pins, all with positive results. I use a tilter. </div> <div>   </div> <div> Kenny </div> </div> </body> </html>