<HTML><HEAD><TITLE>CA delivery apparatus, verdict</TITLE> <STYLE type=text/css></STYLE> </HEAD> <BODY style="BORDER-TOP-STYLE: none; BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE: none; BORDER-BOTTOM-STYLE: none">I have a Yamaha C2 developing some falseness.   When I apply pressure to the bridge pin it stops...I'm going try it...I'm assuming you don't have to move the string out of the way?   <BR><BR>David Ilvedson, RPT<BR>Pacifica, California<BR><BR> <DIV style="PADDING-RIGHT: 5px; PADDING-LEFT: 5px; PADDING-BOTTOM: 5px; BORDER-LEFT: #000000 3px solid; PADDING-TOP: 5px"> <DIV><BR> </DIV> <DIV>The pen delivered a measured amount with precision. It clogged often</DIV> <DIV>so the wholesale treatment of the bridge would be best served with the</DIV> <DIV>syringe. A 1/8" bead of glue in the pen wicked right in when touched on</DIV> <DIV>the base of the pin without a trace and stopped the false beat.</DIV> <DIV>This would be perfect for spot sizing on the job where producing</DIV> <DIV>a lubed hypo and subsequent clean-up is prohibitive.</DIV> <DIV><BR></DIV> <DIV>A combination worked well too. I placed the pen tip on a crack or base</DIV> <DIV>of the pin and fed the glue with the syringe. If you keep the reservoir</DIV> <DIV>to a minimum the flow wicks in without overflow.</DIV> <DIV>The tip of the pen acted as a fine-point interface.</DIV> <DIV><BR></DIV> <DIV>I didn't have an open container of CA in which to dip the pen.</DIV> <DIV>This would have allowed for faster application with the pen.</DIV> <DIV>I loaded the pen quill from either the bottler or syringe.</DIV> <DIV>But it's loading-up caused me to use the syringe across the sections.</DIV> <DIV>Perhaps if I had cleaned it better there may not have been such reaction.</DIV> <DIV><BR></DIV> <DIV>There was some minor migration but nothing like from the bottle. With that,</DIV> <DIV>a cloth and brush kept the surface clean. Any gloss from glue drying on the</DIV> <DIV>surface was brushed to a matte finish and the bridge looks undisturbed.</DIV> <DIV><BR></DIV> <DIV>The beats are gone and the treble is clean and bright.</DIV> <DIV><BR></DIV> <DIV>So, drafting pen for the tool case for spot sizing. Lubed syringe for extended</DIV> <DIV>bridge pin sizing.</DIV><X-SIGSEP><PRE>-- </PRE></X-SIGSEP> <DIV><BR>Regards,<BR><BR>Jon Page</DIV></DIV></BODY></HTML>