<HTML style="FONT-SIZE: medium; FONT-FAMILY: AGaramond Bold"><HEAD> <META http-equiv=Content-Type content="text/html; charset=windows-1251"> <META content="MSHTML 6.00.2800.1522" name=GENERATOR></HEAD> <BODY> <P> <DIV>I've been using an 8 inch Jointer Sander, for dimensioning stock. It attaches to the table saw and works very well for very close tolerance dimensions. The problem is that I'm trying to find a supplier for the adhesive discs and Sears has been absolutely no help. The Discs are 8" diameter with a 3" hole punched in the center. The only thing that Sears has is the 8" discs, but with no hole in the center. The hole is need to clear the arbor/balance washers of the table saw. !!!!! :-(</DIV> <DIV>It used to be, if you wanted to get the specs. of one of their olde machines, etc., you could go to the Service Dept. and they's look in a micro-film scanner and get the info for you. Then you could cross reference it to the original manufacturer and possible current manufacturer. </DIV> <DIV>I have a sneaking suspicion that all that stuff has been put in a 'puter somewhere. If only I could find out: If that was done? and How to access it?</DIV> <DIV>Any one have any thoughts or suggestions?</DIV> <DIV> </DIV> <DIV> </DIV> <DIV>Joe Garrett, R.P.T. (Oregon)</DIV> <DIV>Captain, Tool Police</DIV> <DIV>Squares R I</DIV> <DIV> </DIV> <DIV> </DIV> <P></P></BODY></HTML>