<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1528" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi Anson,</FONT></DIV>
<DIV><FONT face=Arial size=2>You did not break the string. Repeat after me, YOU
DID NOT BREAK THE STRING!</FONT></DIV>
<DIV><FONT face=Arial size=2><G></FONT></DIV>
<DIV><FONT face=Arial size=2>Take note of the deflection angle of the string as
the unwound end renders over the top bridge on its way to the tuning pin.
There are one or two spinet models that have up to a 45% deflection here.
These are strings ready to snap at the slightest addition of
pressure.</FONT></DIV>
<DIV><FONT face=Arial size=2>Also take note that on these models, often
the tuning pin is driven in so far that the wire is starting to ride over itself
at the coil. Another recipe for string breakage.</FONT></DIV>
<DIV><FONT face=Arial size=2>When you see this in an instrument I do two things.
A drop of Goose Juice at the pin ( not the tuning pin ) where the string
deflects, and warn the customer that string breakage is posible and explain that
you are doing everything posible to avoid breakage.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=anson.kao@gmail.com href="mailto:anson.kao@gmail.com">Anson Kao</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, March 30, 2006 10:26
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Broken Strings</DIV>
<DIV><BR></DIV>
<DIV>Hello Everyone;</DIV>
<DIV> </DIV>
<DIV>I need to do my first string repairs ever. Fun! I have 3
broken bass strings, broken very close to the tuning pin. Yes... I broke
them myself. Spinet, hadn't been tuned for 20+ years, didn't seem to be
rusty and I tuned flat first before raising the pitch (about an entire
semitone flat!) so I'm not sure if I could have avoided the break... </DIV>
<DIV> </DIV>
<DIV>Anyhow, I figure I should "splice" the old strings. Since the
"splice" would be where the string isn't "live", is it necessary I use the
identical thickness of wire? I am not planning to go full time anytime
soon and probably won't have much use for 3 roles of wire. I've also
heard about moist fingers causing rust. Do you wear gloves when handling
wire? </DIV>
<DIV> </DIV>
<DIV>Also if anyone is in the Toronto area could you refer me to a store where
I can buy supplies. I have been purchasing everything online so far and
the shipping wait times make it hard for me to sleep at night.</DIV>
<DIV> </DIV>
<DIV>Appreciate all input, thanks all!</DIV>
<DIV> </DIV>
<DIV>Anson</DIV></BLOCKQUOTE></BODY></HTML>