<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML style="FONT-SIZE: x-small; FONT-FAMILY: MS Sans Serif"><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1543" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial>Is the piano old enough to show the strike point where the
hammers have been hitting the strings? </FONT></DIV>
<DIV><FONT face=Arial>Then its easy. If not, </FONT><FONT face=Arial>measure the
probible strike point of A0 and install mute to be able to raise above
that point easily and yet be able to be adjusted below by 1/2"</FONT></DIV>
<DIV><FONT face=Arial>You will not have to worry about C 88 as the measurement
is only 1/8" or so at that point.</FONT></DIV>
<DIV><FONT face=Arial>Straight line from A0 t0 C 88 and trim to
fit.</FONT></DIV>
<DIV><FONT face=Arial>Joe Goss RPT<BR>Mother Goose Tools<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=noel444@access4less.net href="mailto:noel444@access4less.net">Noel
Kaufmann</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, May 12, 2006 8:58 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> HELP!! QRS "grand damper rail"
install. nightmare</DIV>
<DIV><BR></DIV>
<P>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Just that. </DIV>
<DIV> </DIV>
<DIV>Any experience anyone? Any success? I talked to the tech guy
at QRS and of course he never installed one. </DIV>
<DIV> </DIV>
<DIV>Though it's basically a simple design, there are a number of challenges
on this thing; and for me anyway, it's especially the actual
sizing/placing of the felt mute. (E.g. action is out for this part, but
how to confirm it will work where placed, without a thousand
re-placements) I spent three hours all-told last week, and could use a
tip/technique/tool idea(?) for the rest of the work...</DIV>
<DIV> </DIV>
<DIV>'Love to hear back from someone in the know, to correspond on the
nuances. I have to get back out to customer's house next
Wednesday! </DIV>
<DIV> </DIV>
<DIV>At any rate, when I'm eventually done (dealer's cost : )
) I could make suggestions for others. Like, don't recommend one
(I actually told the customer, before being able to get out to his house, that
in the meantime he could experiment with a couple scarves on the
strings... He thought I was kidding, but I wasn't, and still amn't. Of
course, this is the customer who doesn't play much at all but who doesn't like
the tone of C88. Oy.</DIV>
<DIV> </DIV>
<DIV>[Sorry, no photos at this time -- maybe when I go back; or not.]</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Noel Kaufmann, RPT</DIV>
<DIV>Santa Fe, NM</DIV>
<P></P></BLOCKQUOTE></BODY></HTML>