<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1"><!-- BEGIN WEBMAIL STATIONERY -->
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I thought Baldwin was using vertically laminated
bridges with no bridge cap. Or is that only on their grands?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>If it is the cap pulling off, I should think that
such a new piano is worth removing the necessary strings and gluing the cap back
down (epoxy might be best). Likely will have to remove bridge pins also. Also,
keep in mind that if a couple inches of cap is visibly pulling away from
the root, I wonder how well the rest of the cap is attached (may want to remove
entire cap and reglue/rebond). What is downbearing like in that area? Seems to
me that even if the cap were not glued well, it would tend to be pushed into the
root by downbearing pressure. I'd recommend taking a very close look to see what
is going on.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV>I went to look at a ca: 2000 Baldwin console , black high polish, today
for a dealer. The treble bridge cap was pulling away at keys 48-59, resulting
in a very plunky tone. I'm told that Gibson/Baldwin no longer backs the
warranty on instruments sold before the takeover. Is this true, and also ,is
this the kiss of death for this piano? Can a permanant repair be made?</DIV>
<DIV>Thanks,</DIV>
<DIV>Rick Ucci/Ucci
Piano</DIV></BLOCKQUOTE><!-- END WEBMAIL STATIONERY --></BODY></HTML>