<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content=text/html;charset=ISO-8859-1>
<META content="MSHTML 6.00.2900.2873" name=GENERATOR></HEAD>
<BODY text=#000000 bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Greetings, </FONT></DIV>
<DIV><FONT face=Arial size=2>Wouldn't part of the problem be at the balance
rail? It seems to me that a proper adjustment of the balance rail glide bolts
would be the first thing I would look into. Then, I'd make sure that the Balance
pin hole in the key is has no slop in it. Too many times I've seen over sized
holes as some think it's OK to have the key so loose around the pin so you can
lift the key at the front so it drops without any friction. That's OK if
your traveling the key parallel to the frame but forcing up in an arc does
not give proper measurements for rocker function. If easing is needed
I always ream the hole side to side... not front to back. Why would the
manufacture over weigh the keystick so much? If your touch can detect it than I
would definitely look into the key bedding situation</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Some interesting answers on this subject! Just my
two cents</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>David Chadwick</FONT></DIV>
<DIV><FONT face=Arial size=2>Las Vegas</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>What causes a key to "bounce"? In that, when the key is pressed and
<DIV><FONT size=+0>> then it returns there is a little bounce up and down.
What can be</FONT></DIV>
<DIV><FONT size=+0>> done to minimize this? </FONT></DIV></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=imatunr@srvinet.com href="mailto:imatunr@srvinet.com">Joe And Penny
Goss</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=mjmccoy@usa.com
href="mailto:mjmccoy@usa.com">mjmccoy@usa.com</A> ; <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, June 01, 2006 10:12
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: "key bounce"</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Hi Mike,</FONT></DIV>
<DIV><FONT face=Arial size=2>Two questions </FONT></DIV>
<DIV><FONT face=Arial size=2>1. Do they bounce equally as bad with the dampers
on as off the strings.</FONT></DIV>
<DIV><FONT face=Arial size=2>1. Where is the lead? In front or behind the
balance rail pin?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mjmccoy@usa.com href="mailto:mjmccoy@usa.com">Mike McCoy</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cy@shusterpiano.com
href="mailto:cy@shusterpiano.com">Cy Shuster</A> ; <A
title=pianotech@ptg.org href="mailto:pianotech@ptg.org">Pianotech List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, June 01, 2006 9:57
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: "key bounce"</DIV>
<DIV><BR></DIV>I just had the same issue with a 1930's Baldwin grand. The
keys bounce after you let go and you can feel it in your fingers when
playing. Nothing worked, including backrail cloth and it did have a ton of
lead in the keys. Someone in my Chapter suggested the wip cushions may
be too hard, and they were. I turned the stack over and steamed them and it
removed the dimples and softened them up. It did help noticeably but the
problem is still there.<BR><BR>Mike<BR><BR><BR>Mike McCoy<BR><BR>Cy Shuster
wrote:
<BLOCKQUOTE cite=mid024101c6855f$39b0c030$6549a8c0@BUSTER type="cite">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
<DIV><FONT size=2>Could new back rail cloth help prevent bounce? I'm
thinking that worn cloth would be like bouncing right off the wood, where
new cloth would give more cushioning...</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>--Cy--</FONT></DIV>
<DIV><FONT size=2><STRONG>shuster</STRONG>piano.com</FONT></DIV>
<DIV> </DIV></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>